| Technical specification of standard equipment |
| Total width in working position | 4000 | mm |
| Lenght in working position | 1800 | mm |
| Width in transport position (raised side protections) | 3400 | mm |
| Working width | 3400 | mm |
| Swath width min/max | 1400 / 2040 | mm |
| Empty weight | 1300 | kg |
| Min. power requirement | 70/95 | kW/HP |
| Efficiency ( for recommended working width) | 3.4 | ha/h |
| PTO speed | 1000 | rpm/min |
| Suspension | Front linkage cat. II acc. to ISO 730-1 |
| Number of disc | 8 |
| Number of knives | 16 |
| left | 8 |
| right | 8 |
| Type of cuting knives | twisted |
| Knives dimensions | 120x49x4 Ø21 | mm |
| Rotationspeed of discs | 3000 | rpm/min |
| Recommended working speed | 10 | km/h |
| Ground following ability |
| up | +14 (450) | º (mm) |
| down | -10 (250) | º (mm) |
| transverse | +/- 24 | º |
| Transport position – horizontally at the front of the tractor | Raised on mowers cylinder and linkage |
| Required hydraulic output | Hydraulic connection at the front of the tractor |
| Swath conditioner drive | – |
| PTO shaft | Standard |
| Additional set of knifes | Standard |
| Spray RAL 6010 400 ml | Standard |
| | |
| Additional equipment: | | |
| Tube for documents | | |
| Connecting to reverse PTO shaft (CW or CCW direction) | | |
