| Permissible total weight: | 21200* | [kg] |
| Load capacity: | 14000* | [kg] |
| Empty weight: | 7200** | [kg] |
| Load volume: | 14 | [m 3] |
| Loading space: | 11.1 | [m 2] |
| Internal length of Loading space: | 5600 | [mm] |
| Internal width of Loading space: | trapezoid: 1955/1995 | [mm] |
| Dimensions: length/width/height: | 9000/2550/3740*** | [mm] |
| Sidewall height: | 1265**** | [mm] |
| Floor/wall thickness: | 4-Mar | [mm] |
| Platform height, measured from the ground: | 1530 | [mm] |
| Wheel track: | 1940 | [mm] |
| Suspension: | tandem – parabolic springs |
| Hitch-ring load: | 2200 | [kg] |
| Tyres: | 600/50-22.5 | |
| Construction speed: | 40 | [km/h] |
| PTO speed: | 1000 | [rpm] |
| Minimum tractor power requirement / adaptor type | 147.4/108.3 | [hp/kW] |
| Adapter type / max spreading width | AH20/25 | [-/m] |
| | |
| * Permissble construction parameters ( homologation parameters may differ ) |
| ** Parameters depend on the equipment specification |
| *** Height with front protective mesh |
| **** Height with a protective wooden batten |
|
| Standard equipment | |
| Monocoque loading case |
| Tandem suspension with 4 parabolic springs, wheel base 1360mm fixed axles equipped with drum brakes 406x120mm. |
| AH20 adapter with 2 horizontal auger beaters with screwed vanes and 2 spreading discs with four screwed vanes on each disc. |
| Chain conveyor with four 14mm chains of high quality steel, with hydraulic drive and stepless speed regulation |
| Drawbar type: fixed to couple with lower hitch of the tractor |
| Drawbar towing hitch: rotary with towing eye ø50mm PRONAR |
| Drawbar support: hydraulic straight leg |
| Control from tractor’s hydraulic distributor |
| Braking system: double line air |
| Crank hand brake |
| Wheel chocks + racks (2 pcs) |
| Hydraulic guillotine slurry gate |
| Hydraulic rear tailgate |
| Front protective mesh |
| A ledder and side steps facilitating access to the loading case |
| Mudguards |
| Lighting system 12V |
| Single line greasing system of the adapter’s bearing |
| Height indicator of the rear slurry gate |
| Rubber cover of rear shield |
| Double-component chemically hardened painting materials |
| Sidewalls, drawbar, axles and conveyor mechanizm colour: green RAL6010 PRONAR |
| Rear sliding wall, adapter, mudguards and front mesh colour: grey RAL7021 PRONAR |
