| Allowable total weight (technically): | 28000 | [kg] |
| Permissible total weight: | 24000 | [kg] |
| Load capacity: | 12500 | [kg] |
| Empty weight: | 11500 | [kg] |
| Load volume: | 41 | [m 3] |
| Loading space: | 18 | [m 2] |
| Loading case inside lenght: | 7840 | [mm] |
| Loading case inside width of the floor: | 2300 | [mm] |
| Dimensions: length/width/height: | 10750/2850/3990 | [mm] |
| Sidewall height: | 2280 | [mm] |
| Loading case thickness (sides): | 0.75 | [mm] |
| Distance from the ground to the platform: | 1700 | [mm] |
| Pick-up width | 2000 | [mm] |
| Total number of pick-up fingers: | 240 (double 120) | [pcs] |
| Rotor diameter: | 800 | [mm] |
| Number of cutting knives: | 45 | [pcs] |
| Theoretical cutting length: | 35 | [mm] |
| Wheel track: | 2150 | [mm] |
| Axle base: | 1810 | [mm] |
| Suspension: | Hydraulic suspension, tandem |
| Hitch-ring load: | 4000 | [kg] |
| Tyres: | 700/50-26.5 |
| Maximum speed: | 40 | [km/h] |
| Tractor power requirement: | 182/133,8 | [hp/kW] |
| PTO of the tractor | 1000 | [rpm] |
| Requirements of tractor’s external hydraulic system: | 200 | [bar] |
| – max. oil pressure | 130 | [l/min.] |
| – max. oil flow | | |
| Standrad equipment: | | |
| Loading box with bolted walls, adapted to mounting additional dosing rollers with drivetrain. | | |
| Walls with trapezoidal profiles and ALUCYNK coating | | |
| Wooden floor board with metal rails for conveyor chains. | | |
| Openwork front wall. Rear wall – hydraulically lifetd. | | |
| Central hydraulic system controlled from tractor’s cabin by electric panel | | |
| Hydraulically folded openwork front wall | | |
| Sidewalls fastening strings | | |
| Chassis frame made of rectangular closed profiles. | | |
| Tandem suspension with 4 parabolic half-springs with axle base 1810mm, compensatory swingarms, fixed front axle and passively steered rear axle. Drum brakes 406x140mm. | | |
| Axles for 60 km/h. | | |
| Hydraulically amortized drawbar with fluent height regulation (hitch, piton fix, ball-type K80) | | |
| Drawbar towing hitch- rotary with Ø50 towing eye (piton, piton-fix) | | |
| Hydraulic tandem suspension with 4 parabolic half-springs, axle base 1810mm, rigid front axle and passively steered rear axle. Suspension is stabilized and regulated hydraulically. | | |
| Pick-up with ground following wheel and roller. Rotor made of wear-resistant steel. | | |
| Cutting beam equipped with 45 independent knives, each protected by spring. | | |
| Drawbar support: telescopic with 2-section gear. | | |
| Chain conveyor with 6 chains and 2-stage hydraulic drive. | | |
| Braking system: double line pneumatic with manual braking force regulator | | |
| 12V lighting system with side marker lights, rear lamps with bars protecting against damage. | | |
| Wheel chocks and racks | | |
| Wide-angle PTO shaft | | |
| Metal mudguards | | |
| Double-component chemically hardened painting materials | | |
| Red RAL3000 PRONAR- frame, drawbar, axles, mudguards, rear beam. | | |
| Green RAL6010 PRONAR- loading box | | |
