| Total length | 2400 | mm |
| Width in working/transport position | 9450/2995 | mm |
| Height in working/transport position | 1720/3900* | mm |
| Working width | 9000 | mm |
| Number of rotors | 8 | pcs. |
| Number of operating arms on one rotor | 6 | pcs. |
| Suspension type | active, shock absorption | – |
| Suspension hitch | Cat. I and II acc. To ISO 730-1 |
| Type of the central transmission | wet (oil bath) |
| Type of rotary transmission | maintenance-free ( grease lubrication) |
| Overload protection | Clutch 1200 Nm |
| Minimum tractor power requirements | 51/70 | kW/HP |
| Maximum PTO speed | 540 | rpm |
| Weight | 1200 | kg |
| Recommended working speed | 10 | km/h |
| Working efficiency | 9 | ha/h |
| Tyres | 16×6.5 – 8(6PR) | – |
| Required tractor hydraulic outputs | One double-acting section with floating position | rpm |
| Adjustment of the spreading angle | Manually, each wheel separately in the range of 13º – 19º | º |
| Tedding near the field border | After manual wheel adjustment ( each wheel separately) | – |
| Lifting the rotors to transport position | Hydraulic – synchronized | – |
| Ground following abillty: | | |
| Module 2 | | |
| up | up to 30º | – |
| down | up to 6º | – |
| Module 3 | | |
| up | up to 6º | – |
| down | up to 4º | – |
| Module 4 | | |
| up | up to 30º | – |
| down | up to 4º | – |
| PTO shaft | Standard |
