| Technical data |
| Technically permissible total weight: | 20000 | [kg] |
| Permissible total weight: | 20000* | [kg] |
| Load capacity: | 15360** | [kg] |
| Empty weight: | 4640 | [kg] |
| Load volume: | 17.3 | [m 3] |
| Loading space: | 12.3 | [m 2] |
| Loading case inside lenght: | 5100 | [mm] |
| Loading case inside width: | 2420*** | [mm] |
| Overall dimensions (lenght/width/height): | 6800/2550/2790 | [mm] |
| Sidewall height: | 1540 | [mm] |
| Floor/wall thickness: | 5/2,5 | [mm] |
| Platform height, measured from the ground: | 1350 | [mm] |
| Wheel track: | 1960 | [mm] |
| Suspension: | parabolic springs |
| Hitch-ring load: | 2000 | [kg] |
| Tyres: | 385/65 R22,5 Regenerated |
| Maximum speed: | 40 | [km/h] |
| Tipping system : | 3-side |
| Tipping cylinder (stroke / oil demand / pressure): | 1980mm/18L/200bar |
| Tractor power requirement: | 104/76,4 | [hp/kW] |
| Tipping angle (backwards/sides): | 50/46 | [˚] |
|
| * depends on the road regulations in each country |
| ** depends on the road regulations and equipment |
| *** width of the loading case suitable for EUROPALET transport |
|
| Standard equipment | |
| Loading case with universal system of opening walls |
| 3-side tipping system of the loading case with ball joints with the rear shock absorbers of optimum spacing |
| Selection of the direction of tipping by two pins that protects against incorrect handling |
| Reinforced floor panel with central locking mechanism |
| Width of the loading case suitable for EUROPALET transport |
| Sidewalls made of waterproof plywood on both sides with aluminum edges, rubber seals and forged locks |
| Frame welded using closed rectangular profiles made of S355 steel |
| Type of chassis: Rectangular with closed profiles |
| The walls of plywood on both sides foiled gr. 18 mm, with a rim made from aluminum profiles, with hinges and locks |
| Left sidewall with central pillars, not divided, 1540mm height, tilt and opening system |
| Right sidewall with central pillar, shared, 800mm +740 mm height, tilt – system |
| Rear wall, 1540mm height, not divided, 1540mm height, tilt system |
| Ladder and steps facilitating the access to the loading case |
| Rear grain hatch with a lever in a rear wall |
| Tandem suspension on 4 parabolic springs, wheelbase 1360mm, fixed axles equipped with drum brakes 406×120 |
| Axles for 60 km/h |
| Drawbar support: hydraulic supporting leg (scissor-type) |
| Drawbar support: hydraulic supporting leg (scissor) |
| Universal fixed drawbar to connet with the lower or the upper hitch of the tractor |
| Drawbar towing hitch: with rotary ∅50 towing eye |
| Axles on 60 km/h |
| Braking system: double line air with connection to a secon trailer |
| Crank hand brake |
| 12 V lighting system with rear electric socket, LED lights |
| Coiled connecting cable lighting system |
| Rear lamps with protective grating |
| Handle with support hydraulic hoses for fittings of connect to the tractor |
| Tipping system with cut-off valve with wide ropes |
| Tipping servo-motor of 3-side tipping system |
| Handle with support hydraulic hoses for fittings of plug to the tractor |
| Wheel chocks + galvanized racks (2 pcs) |
| Loading case support |
| Rear plastic mudguards |
| Foldable rear protection |
| Double-component chemically hardened painting materials, UV-resistant |
| Tipping frame colour: red RAL 3000 PRONAR |
| The colors of the walls – plywood foiled – dark brown |
| The rear cover, EC type-approval, folding |
